PDA users click here
 Home Inspections - Building Inspections - Real Estate Inspections.  Over 80,000 home inspections and building inspections performed by licensed Professional Engineer inspectors in the greater New York area.  Insight and understanding that only an Engineer can provide.
Home Inspections
Building Inspections
Serving Manhattan, Queens,
Brooklyn, The Bronx, Staten Island,
Long Island, Westchester, Putnam,
Rockland, and Fairfield
Over 80,000 Inspections Performed Since 1968
Licensed Professional Engineers
Licensed Home Inspectors
Call 800.640.8090
or
Contact Us 24/7
Inspections of Homes,
Buildings, Condos and Co-ops
Insight and Understanding
Only an Engineer Can Provide
 Home Inspections - Building Inspections - Real Estate Inspections. Over 80,000 home inspections and building inspections performed in the greater New York, New Jersey, and Connecticut area.  All our home inspectors are Licensed Professional Engineers.
Call 631.858.5500
or
about your
Home Inspection,
Building Inspection,
Condo Inspection, or
Coop Inspection.

 
 
 
 
 

Slip and Fall Injuries
Trip and Fall Injuries


Heimer Engineering investigated thousands of slip and fall (trip and fall)  injuries.There are many injuries that occur as a result of building or site defects.  Among the services Heimer Engineering's licensed Professional Engineers perform are investigations and reports on slip and fall (trip and fall) and other incidents caused by building defects.  Heimer Engineering has investigated many slip and fall and other incidents at a wide variety of buildings and sites such as restaurants, parks, museums, office buildings, homes, apartment buildings, outside steps, sidewalks, playgrounds, and more.  These locations are prone to defects such as slippery or irregular floors, irregular stairs, improper handrails, unsafe curbs, poor or improper maintenance, improper design, improper construction, unsafe equipment, and improper repairs.

Building codes are designed to protect the public.  In addition, there are numerous standards published covering virtually all aspects of modern life.  These standards also serve to protect the public.  Among the most well known standards are those published by the  American National Standards Institute (ANSI), the American Society of Testing and Materials (ASTM), the National Fire Protection Association (NFPA™), and Underwriter's Laboratories.  In many cases  City of New York Building Codes or New York State Building Codes are also applicable.  By including these references in the reports, it becomes obvious how the violation contributed to the injury.

In performing these investigations, Heimer Engineering analyzes the site and determine the cause of the slip and fall (trip and fall) injury.  If appropriate, photographs and measurements are taken to document the conditions at the site.  It is then determined which codes and standards are applicable, and how conditions at the site violated the codes or standards.

After the research, a report is prepared describing the conditions at the site, the cause of the slip and fall (trip and fall) and the code and reference standard violated.  The reports are clearly written and help all parties understand the cause of the injury.

If the case has to be litigated in a court of law, Heimer Engineering's Licensed Professional Engineers are ready to serve as expert witnesses in a court of lawIn many cases, the clearly written reports can help facilitate a quick resolution.  If the case has to be litigated in a court of law, Heimer Engineering's licensed Professional Engineers are ready to serve as expert witnesses in a court of law.  Staff Engineers have qualified as expert witnesses in Federal Courts and at all levels of New York State Courts.

To setup an appointment for a home inspection or building inspection, or for more information, call 800.640.8090 or use the online form 24/7.



 Home Page  ●  Environmental Topics  ●  Inspection Topics  ●  Inspection Photographs
 Employment Opportunities  ●  Choose Wisely  ●  Inspection Basics   Inspection Quick Info   Contact Us 24/7


Heimer Engineering Home Inspections, Building Inspections, Condo Inspections, Coop Inspections

● Bronx, New York – 718.547.2000
● Brooklyn, New York – 718.237.7777
● New York, New York – 212.563.4777
● Queens, New York – 718.544.3000
● Staten Island, New York – 718.227.5000
● Toll Free – 800.640.8090
● Nassau County, New York – 516.487.2100
● Suffolk County (East), New York – 631.288.3900
● Suffolk County (West), New York – 631.858.5500
● Putnam County, New York – 845.638.4900
● Rockland County, New York – 845.638.4900
● Westchester County, New York – 914.576.6100

Heimer Engineering accepts PayPal and all major credit cards.

Solution Graphics

Helpful Information

 

 

This web site is best viewed with at least Microsoft® Internet Explorer version 7.0 or Mozilla Firefox 2.0.  Other web browsers may not display this web site properly.  Heimer Engineering's licensed Professional Engineers are ready to serve your home inspection, building inspection, coop inspection, and condominium inspection needs.  All Heimer Engineering's licensed Home Inspectors are also licensed Professional EngineersHEIMER®, HEIMER INSPECTIONS®, FOR A GOOD LOOK®, WE LOOK GOOD®, and HEI-LITE® are registered trademarks of Heimer Engineering PC.

Home Inspections Building Inspections Licensed Professional Engineers
Heimer Engineering PC Insight and Understanding only an Engineer can Provide.

Terms of use Privacy Policy Employment Opportunities

Sitemaps: ror.xml, sitemap.html, sitemap.xml, urllist.txt, ../public_html/sitemap.xml.gz.

This page was last reviewed on June 04, 2009.
Copyright © 1997-2009 Heimer® Engineering PC  All rights reserved.
Heimer Engineering PC, 2171 Jericho Turnpike, Suite 230, Commack, NY, 11725-2947


Call 800.640.8090