Indoor Air Quality, Carbon Monoxide, and Mold
Testing
for indoor air quality (IAQ) requires that air samples be taken in the
building. You cannot just request an indoor air quality test,
but must specify the contaminants you are testing for. The technician
performing the tests will adjust the collection methods and collection
time according to the tests being performed.
There are so many issues related to indoor air quality that even very limited testing can be cost-prohibitive. If you have a specific concern such as a known health problem or allergy, have appropriate tests performed. For further information, visit the EPA indoor air quality web site , the U.S. Consumer Product Safety Commission indoor air quality web site , or the U.S. Consumer Product Safety Commission home safety web site . If you want to check the indoor air quality in the home or building you are purchasing, contact an appropriate specialist.
Carbon Monoxide
Carbon monoxide is a colorless, odorless gas that can be produced when fuel is burned. Carbon monoxide in an enclosed space can be deadly, as it interferes with the blood's ability to absorb oxygen. It is recommended that carbon monoxide detectors be present in any building that contains fuel burning equipment. Click here for the EPA carbon monoxide information web site
The State of New York passed Amanda's Law, which takes affect on February 22, 2010. This law has specific requirements for carbon monoxide detectors in many buildings. Click here for information on Amanda's Law and carbon monoxide detector requirements in the State of New York
Mold
Mold is part of the natural environment and breaks down dead organic matter such as fallen leaves and dead branches outdoors. Indoors, microscopic mold spores can land on a wet or damp spot and grow. Initially, this growth is visually imperceptible. Mold is a living organism and grows quickly. Mold spores can cause allergic reactions in people. Many people claim that mold aggravates their asthma condition. Click here for mold photos
It is not always possible to completely eradicate mold. Mold spores can be killed, but new spores will grow unless the source of mold-causing moisture is found and eliminated. For more information on mold, visit the Click here for the EPA mold information web site .
If you want to check for mold in the home or building you are purchasing, contact an appropriate specialist to determine if there are mold spores present. Heimer Engineering does not inspect or test for mold.
To
setup an appointment with Heimer Engineering PC for a home inspection, building inspection, condominium inspection,
coop inspection, or Professional Engineering consultation, to find out about other
Professional Engineering
services offered, or for more information, call us anytime at 718.544.3000,
212.563.4777, 516.487.2100, 631.858.5500, 914.576.6100, 845.638.4900, or 800.605.1500
or you can click here to contact us 24/7
using the online form.
| Asbestos | Indoor Air Hazards | Lead Based Paint | Oil Leaks |
| Phase I Surveys | Radon Gas | UFFI | Water Quality |
Call 800.605.1500,
Home Page
Bookmark Page
Email Page
Print Page
This web site is best viewed with at least Microsoft® Internet Explorer version 7.0 or Mozilla Firefox 2.0. Other web browsers may not display this web site properly. Heimer Engineering's licensed Professional Engineers are ready to serve your home inspection, building inspection, coop inspection, and condominium inspection needs. All Heimer Engineering's licensed Home Inspectors are also licensed Professional Engineers. HEIMER®, HEIMER INSPECTIONS®, FOR A GOOD LOOK®, WE LOOK GOOD®, and HEI-LITE® are registered trademarks of Heimer Engineering PC. Heimer Engineering is not an environmental testing company, and does not inspect or test for any environmental hazard. All inspections are performed only after the client signs an appropriate agreement. Click here to download an agreement. The use of this web site is governed by our Terms of Use.
Home Inspections Building
Inspections Licensed Professional
Engineers Terms of use Privacy Policy Employment Opportunities Sitemaps: ror.xml, sitemap.html, sitemap.xml, urllist.txt, sitemap.xml.gz.
This page
was last reviewed on
July 15, 2010. |
|||||||||
